This Tiny House offers a cozy space with a roomy feel!

This tiny house offers a cozy space with a roomy feel.

This 20’ Clear Creek model Tiny House on Wheels has clear coated pine tongue and groove interior walls and ceiling. It is insulated with spray foam:  2” in the walls, 3” in the ceiling.   The exterior is Painted Board and Batt SmartBoard.  It has a double pitch Tuff Rib metal roof with a dormer roof above the sleeping loft and an A frame roof above the living room. There is an 8 ft. Sleeping loft above Bathroom and Kitchen area with approximately 6’9” under loft and 42” above.  The loft is lighted with 2 wall sconces on end wall and a 1 dome light centered on ceiling. There is a total 9 windows in this tiny home including 4 in the loft area.  The kitchen has shaker style Arcadia oak cabinets and a 3 burner Atwood RV Range with oven with a 24” range hood.


Jennifer’s 28′ Clear Creek Tiny House on Wheels


  • This Tiny house on wheels features a front living room with a custom built 96” long by 18” deep wine rack and book shelfs with two swing out tables, a 10’ loft with dormers located above bathroom and kitchen, a 6’ loft over the living room, a back bathroom with a 4.5 Ft Cast Iron Satin Nickel Claw foot roll up tub, and a middle kitchen with a Houzer Onyx 1 granite undermount kitchen sink with Kohler Single Handle pull down sprayer kitchen faucet, a 20 in. 2.42 cu. ft. Gas Range and a range hood, black walnut countertops and whirpool 16cu ft top freezer refrigerator.

Tiny House Toy Hauler RV Tour

Welcome to our new Tiny House Toy Hauler RV!

Tiny Idahomes has a 35’ Tiny House, gooseneck toy hauler for sale that is fully off grid ready! This beautiful Tiny House has only a few items left to be done (paint touch-up and some small trim items) before it is complete. It comes equipped with 12-volt 6 ft slide out in the bedroom with a queen size mattress and lift up storage under the bed. Custom built desk and closet with custom built barn doors. Has split bathroom off the master bedroom. 5’ sunken bathtub with fold down teak wood floor that sits on top of the bathtub. Separate sink/toilet area with custom Corian waterfall sink with full height tile backsplash and brushed nickel faucet. Kitchen has a propane/electric full size RV refrigerator, built in microwave, dishwasher, propane 4 burner cooktop, deep under mount stainless steel sink with pullout gooseneck faucet in satin nickel finish. Custom built, white shaker style kitchen and pantry cabinets with ample storage. L-shaped Corian countertop with full height glass tile backsplash. Bar area with built in wine rack below. Washer/Dryer combo unit built into the wall with custom cabinetry. 12- volt bed and couch lift system in the living area. 12-volt lighting throughout. The back wall folds down so you can pull toys inside for transport with a 11’ x 7’ wide area to park them and tie them down. This unit comes equipped with dual 12 volt deep cycle batteries, dual propane tanks and heated 100 gallon fresh water tank, 50 gallon grey and black tanks with 12-volt water pump , 50 amp 220/120/12-volt converter. On the exterior this unit has a 12-volt 20’ awning and heated storage area under the gooseneck.
This Tiny House Toy hauler is a must see, one of kind unit!
Financing Available.

10 Great Reasons to Choose Tiny Idahomes to Build Your Tiny House RV

By working with Tiny Idahomes you have the following advantages over other manufacturers when building your own tiny home.

  1.  We take pride in the quality of our tiny house builds. Throughout your tiny home, we use only high-quality materials. Our tiny houses on wheels are meticulously built by talented craftsmen.
  2. We have some of the Best Prices of any established builder in the tiny house industry.
  3. We are family owned and operated. Our owners Jesse and Anca Collinsworth are on site working directly with customers and our talented employees.
  4. You deal directly with us the entire time. No middle man or marketing operation far removed from where your tiny house is actually being built. We can keep you updated and send you pictures during the process of your build.
  5. RVIAWe were one of the first builders to become a member of the Recreation Vehicle Industry Association (RVIA). This can be a big advantage for financing and the easy mobility of your tiny house on wheels.
  6. We are the only builders that build our own trailers that are NATMNational Association of Trailer Manufacturers (NATM) membership. We build each trailer for the optimal structural characteristics specifically designed for a tiny house RV foundation, with the weight distribution precisely tailored to each build.
  7. We are licensed, insured, and bonded. All of our tiny houses on wheels come with a bumper to bumper warranty.
  8. We can ship anywhere in the U.S. We have tiny houses all over the country,        from Maine to Hawaii.
  9. We are a Custom Builder allowing us to work with you to create your tiny home. We have extensive experience incorporating features including slide-outs, bed lifts, porches, awnings and more.  We can build for completely off-grid operation.
  10. We can sell you just a Trailer or a shell if you want to build or finish your tiny house yourself.

If you are in Idaho, come tour our manufacturing facility. We looking forward to meeting you and working to build your tiny home together.

Tiny House Trailers – Purpose Built by a Tiny House Manufacturer

Our tiny house trailers are the rolling foundations of out tiny houses.  The trailer is crucial to the integrity of the entire structure.  Everything built on top depends on the structural integrity, suspension and vibration handling, and weight balance of tiny house trailer.

When Jesse started Tiny Idahoms ,  the first thing he had to figure is where to get the trailers to build on.  He looked into re-purposing a regular RV trailer.  He quickly realized that there is a tremendous amount of work getting the trailer ready to build on, and when you’re done you still don’t have a trailer that was built for a tiny house RV.  Next he went to trailer manufactures to have the trailers custom made for him.  This was an improvement, but the manufactures primary experience was in building cargo trailers and equipment hauling trailers.  It’s just not the same thing and Jesse still wasn’t getting exactly what he was looking for.

To solve the problem of finding the perfect tiny house RV trailer, Jesse started an in-house partnership with highly experienced welders and metal fabrication designers.  They set out to design a trailer that has the sole purpose of being the perfect mobile foundation for a tiny house on wheels.


At Tiny Idahomes we build all our trailers at our location and your safety is our first concern. We are a National Association of Trailer Manufactures (NATM) certified trailer manufacturer.  NATM is dedicated to improving trailer safety. One way this is accomplished is through a mandatory Compliance Verification Program, requiring all Regular members (trailer manufacturers) to verify they have the manufacturing processes in place to build trailers that meet Federal Motor Vehicle Safety Standards (FMVSS) and industry best practices.

Of course we highly recommend our Tiny House products.  Building a truly livable tiny house is not easy.  We can save you a lot of time and frustration by building it for you.  We do understand there is a big part of the Tiny House Movement centered on building it yourself.  It can be a labor of love and the experience of building can be a big part of it.   For these people we offer our purpose built Tiny House Trailers for sale. The trailers we offer for sale are the exact same precision built tiny house trailers we use as the foundation for our own Tiny Homes.  You can check out prices and specifications on our Tiny House Trailers Page.  We can customize your Tiny House RV trailer to meet the requirements of your build.  You can specify axle weight and axle position as long as it meets NATM requirements.

All our trailers have an 8′ wide deck and are 8’6″ to the outside of the wheel wells.. We built tow-behind trailers in lengths from 20′ to 28′. This the buildable  length; the tongue adds a few more feet.



We make gooseneck/5th wheel trailers in 34′ and 40′ lengths.





Our trailers are constructed with 2” x 5 “, 1/8”thick rectangular steel tube main frame and 2” x 5 “ , 3/16” tongue and rear bumper.  We use only heavy duty epoxy based primer and paint to provide extremely long lasting corrosion protection.   We weld in 1/2” steel house anchor bolts 6” from the corners and ever 4’ in between to securely fasten your house to the trailer.   For safety we include high quality trailer brakes with a breakaway system.


Leveling jacks are welded in place at all four corners.





We use sealed LED break/running lights and the trailer is prewired for clearance lights, front and rear.  Every trailer includes AC, battery and propane mounts.   Fenders and wheel wells are a common point of corrosion on the trailer and water damage to the house so we take special care in this area.


The wheel wells are sealed, inside and out, with polyurethane sealant in addition to the epoxy paint and primer.  We weld on a water skirt to the upper side of the fenders to prevent water from penetrating the house.  Another feature you won’t find everywhere is the bottoms of out trailers are covered with 24 gage galvanized steel sheeting.  This protects the underside of you tiny house from damage, moisture and mold.  It forms a nice dry chamber to hold the insulation for the underside of your tiny house RV.

Another advantage of the galvanized steel bottom is protection from rodent intrusion.  Mice, wood rats, and pack rats invading RVs and tiny houses are a very common problem.  For the last six or seven years my sister has been telling me about her battle with mice.  She has a medium sized travel trailer parked on her property in Vermont.  It’s on o lovely spot with a beautiful view and she uses it mostly for extra guest accommodations.  It didn’t take long after the trailer arrived for the mice to move in. Let the battle begin.  From the inside she has tried snap traps, glue traps, poison bait. From the outside she has tried crawling under and stuffing crevices with steel wool, calking, patching, anything to try to block their entry.  No matter how many she dispatches, no matter how she tries to block them, they keep coming back and they keep making more mice.  A couple of weeks ago she told me that she surrenders; the mice win.  She is giving up and getting rid of the trailer.  If she does replace it, it will be with a Tiny House built on one of our tiny house trailers.  Mice and wood rats are smart, tough, and persistent, but they can’t chew through 24 gage steel.

If you’re building a tiny house on wheels, you have lots of options of what to build it on.  You are going to invest a lot of time, effort, and money on your project, so don’t build it on an uncertain foundation. This is probably the most critical decision you’ll make in your build.  Look around, compare, I think you will see we offer a very high quality product at a very reasonable price. We understand tiny house trailers because we build tiny houses.  The quality of our product is built on the quality of our trailers.

Enjoy your build!

Tinyhouse Tim